FGI - FAQ's Professional Information MSDS

MATERIAL SAFETY DATA SHEET ANSI Format   SECTION  1  -  PRODUCT AND COMPANY IDENTIFICATION  Product Name: FROG Gone It              F.R.O.G. Concepts, LLC                                                                       450 Kingston Rd Lexington, KY. 40505 For information or emergencies call:  859-293-9363 Issued Date January 1, 2004   SECTION  2  -  COMPOSITION / INFORMATION ON INGREDIENTS  Hazardous Ingredients(s): NONE.  The specific identities of the ingredients of this mixture are considered by F.R.O.G. Concepts, LLC to be TRADE SECRETS, and are withheld in Accordance with the provisions of paragraph 1910.1200 of the Title 29 of the Code of Federal Regulations.   All materials are listed on the TSCA inventory of substances, the Canadian DSL, and the EINECS. There is no required reporting or other compliance required by TSCA Section 8.  NEW JERSEY RIGHT-TO-KNOW: (Trade Secret registration Number)...NJTSRN-09609  In addition, FROG Gone It does not contain any substance included in the following lists of toxic chemicals and wastes:                  RCRA List (40 CFR 261, Subparts C & D).                 SARA 313 List (40 CFR 372.65) and percentages                 California Proposition 65 List                 DOT List (49 CFR 172.101 Appendix) and Reportable quantities   SECTION  3  -  HAZARDS IDENTIFICATION  This mixture has not been tested as a whole.  None of the ingredients are listed as carcinogens or potential carcinogens by NTP, IARC or OSHA. Medical Conditions Generally Aggravated by Exposure:  None known to F.R.O.G. Concepts, LLC  Hazard Rating                       0 – Least                                                   1 – Slight Health                     1               2 – Moderate Fire                          0               3 – High Reactivity               0              4 – Extreme   SECTION  4  -  FIRST AID MEASURES  Emergency and First Aid Procedures:  N/A in normal operation. Inhalation:  None Eye Contact:  Flush immediately with clean water for at least 15 minutes.  Contact a physician if irritation persists. Skin Contact:  Flush with fresh water Ingestion:  Give milk or water, induce vomiting.  Get medical attention immediately or call emergency medical center. Never give anything by mouth to an unconscious person. Get medical attention immediately.   SECTION  5  -  FIRE FIGHTING MEASURES  Flash Point:  None (TCC)      Flammable Limits:  *N/A Extinguishing Media:  Carbon Dioxide, dry chemical or Foam. Special Fire Fighting Procedures:  None. Unusual Fire and Explosion Hazards:  None known to F.R.O.G. Concepts, LLC   SECTION  6  -  ACCIDENTAL RELEASE MEASURES  Steps to be taken if Material is Released or Spilled:  Flush small amounts into drain. Collect and return large amounts to container.     SECTION 7  -  HANDLING AND STORAGE  Handling and Storage precautions:  Store in a cool, dry area.  Keep containers tightly closed and upright when not in use.  If frozen, thaw and mix to make usable. Other Precautions:  DOT Class not required.  Good manufacturing practices dictate that an eyewash fountain and/or safety shower should be available in the work area. SECTION  8  -  EXPOSURE CONTROLS  Do not eat, drink or use for personal hygiene. Incidental skin contact is not harmful Respiratory Protection:  None Ventilation:  None Protective Gloves:  None Eye Protection:  N/A in normal operation.  Safety glasses when handling. Other Protective Clothing or Equipment:  None Work/Hygienic Practices:  N/A   SECTION  9  -  PHYSICAL AND CHEMICAL PROPERTIES  Boiling Point:  212°F@ mm Hg                           Vapor Pressure:  17.7 Melting Point:  *N/A°C                                        Vapor Density:  N/A Specific Gravity:  1.0                                              VOC:  None Solubility in water:  100%                                     Evaporation Rate (Butyl Acetate = 1) <1 pH                                                                            6.5                                                                                                                                               Appearance and Odor:                                         Clear / Milky Liquid, Citrus/ Floral odor.  Product may appear rosy colored.  SECTION  10  -  STABILITY AND REACTIVITY  This product presents no significant reactivity hazard.  It is stable and will not react violently with water.  Hazardous polymerization will not occur.  Avoid contact or contamination with oxidizing agents.   SECTION  11  -  TOXICOLOGICAL INFORMATION  Eye Effects                Moderately irritating  Skin Effects               Irritation:  Slightly irritating Absorption:               LD50>500,000 +/- mg/kg Sensitization:             Positive    SECTION  12  -  ECOLOGICAL INFORMATION Biodegradable                          yes USDA                                        C-1 Plants                                        no effect on plants known to F.R.O.G. Concepts, LLC, Inc with normal use Animals                                    avoid eye contact. Do not let them eat or drink   SECTION  13  -  DISPOSAL CONSIDERATIONS  Waste Disposal Methods: Triple rinse and recycle.   SECTION  14  -  TRANSPORTATION INFORMATION   May be shipped normally as a non-hazardous material   SECTION  15  -  REGULATORY INFORMATION  NA   SECTION  16  -  OTHER INFORMATION  The information in this MSDS was obtained from current and reliable sources.  However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy.  Since the conditions for use, handling, storage and disposal of the product are beyond F.R.O.G. Concepts, LLC control; it is the user’s responsibility both to determine safe conditions for use of this product and to assume liability for loss, damage or expense arising out of the product’s improper use.  No warranty, expressed or implied regarding the product described herein shall be created by or inferred from any statement or omission in this MSDS.  Various Government agencies (e.g. DOT, EPA, FDA) may have Specific regulations concerning the transportation, handling, storage, use or disposal of this product which may not be reflected in this MSDS.  The user should review those regulations to ensure full compliance.